Uniflair WMA 0281 Manual de Instalação descarregar pdf (Página 9)

INSTALLATION

Wall Mounted 0121…0661

Monobloc Wall Mounted Unit - WMA/WMF 0121-0181-0251-0281-0331-0551-0661 - Rev. 2.0. - Date: 18-07-2000 EN

9 (22)

WMF

0551

WMF

0661

1050 1050

2250 2250

625 625

(*)

300 300

(*)

300 300

E (*)

1500 1500

300 320

(*) see par. ‘WORKING SPACE’

Fig. 6

Fig. 7

WM* 0551-0661

POSITIONING THE UNIT

WM units are designed to be installed outdoors. However, it is recommended to protect the unit from rain, snow or

water falling from drains or gutters.

♦ The unit must be perfectly vertical with a maximum slope of 6-7 mm: a levelling defect can cause spillage from

the condensate tray.

♦ Do not install the unit less than 200 metres from the sea or near spas with sulphurous springs. Make sure that

the unit cannot take in air which contains vapours of inflammable or greasy substances.

♦ The air flow taken in by the fans via the condenser coil must not be obstructed in order not to reduce the

efficiency of the unit and to avoid the unit stopping because of the intervention of the compressor’s safety

functions;

♦ If the installation location is windy, it is advised to choose a protected area since the condensate axial fans have

limited pressure (not greater than 10 Pa). See fig 5. and 7.

WORKING SPACE

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 21 22

Sem comentários

Uniflair WMA 0281 Manual de Instalação Página 9